High Purity ninety two% 95% Alumina Ceramic Cylinder/ Sleeve/ Pipe Liner
Item Description
Ceramic Cylinders and segments is created from ISO pressed alumina, which is a extremely dense ceramic material that has remarkable resistance to each sliding and effect abrasion. Ceramic cylinder and segments offer you durable put on safety for straight steel pipes and bends. Our specia lproducts are engineered and developed to related tasks of our buyers. Due to exceptional wear resistant properties of higher defense , ceramic cylinder and segments is supplied even at modest wall thicknesses, supplying bodyweight-saving solutions for pipe transportation techniques. Chemshun dress in ceramic cylinder measurement selection from 10mm to 500mm , pre-engineered ceramic cylinder lined steel composite pipe also can be offered ..
Feature
· Dress in resistant
· Impact resistance
· Simple installation
· Limited installation time
· High hardness
· Superior abrasion
· Corrosion and chemical resistance
· Light weight
· Low maintenance cost: Super wear-resistance reduce the maintenance frequency and also the routine maintenance cost.
· Good fluidity : Smooth surface ensure the free flow of material CZPT blocking
Application
· As alumina ceramic use-resisting lining of coal-electing equipment on coal sector
· Cements industries
· As put on resistant alumina ceramic lining of tumble funnel, lining of wear-resisting pipe and bender,
· As dress in resistant alumina ceramic liner of substance tranfer pipe and chute, and many others, on steel market.
· As dress in ceramic liner for l thansfer equipment
· As Alumina ceramic use plates Within and outside area of powder separating products on iron and steel performs
· Ceramics, mines and other grinding products lining
· Components of equipment hermal and electrical power plants
· Grinding techniques Mixer Application places
· Separator systems chain conveyor
· Cyclones diffusor
· sinter slurry ducts
· Hooper Higher temperature cyclones
· Ventilator housing salt crops
Chemshun Ceramic Pipe Rewards
· Long lifetime and upkeep cost-free operation
· No operation interruption or generation losses
· No contamination of the conveyed resources due to abrasion, mixture or oxidation
· Physiologically harmless, suited for foodstuff products
· Smooth floor to accomplish good flowability and to steer clear of plugs
· No spilled materials to clean up
· Reduced dress in decline and extended operating lifestyle.
· Excellent effect resistance.
· Great corrosion resistant
· Excellent thermal shock resistance.
· Easy surface area and great adherence resistance.
· Quick set up and excellent service soon after sale.
· Complex condition and numerous measurement created in accordance to customers’ calls for.
Proportions
Product | ID(mm) | OD(mm) | Thickness(mm) | Duration(mm) | R(mm) | Degree |
Straight Tube | 76 | 106 | 15 | 150-250 | / | / |
Straight Tube | a hundred | 140 | 20 | 305 | / | / |
Straight Tube | 150 | 185 | seventeen.five | a hundred and fifty-250 | / | / |
Straight Tube | 152 | 182 | fifteen | 150-250 | / | / |
Straight Tube | two hundred | 240 | 20 | 305 | / | / |
Bend | seventy six | 106 | fifteen | / | four hundred | 7.five |
Bend | one hundred and one | 131 | fifteen | / | five hundred | 5 |
Bend | 150 | 185 | seventeen.five | / | 1500 | 3 |
Bend | 151 | 181 | fifteen | / | 750 | 7.five |
Chemshun Ceramic pipe measurements range : 10~500 mm |
Software in CZPT
Sector | Tools method | Products areas |
Cement | Pre-mixing program for crashing limestone and crude gas | Chute, bunker, pulley lagging, discharge cone |
Uncooked mill method | Feed chute, retaining ring, scraper plate, seal ring, pipeline, bucket guard, cyclone, powder concentrator human body, bunker | |
Cement mill program | Chute, bunker, admirer vane wheel, fan casing, cyclone, round duct, conveyer | |
Ball mill technique | Pulverizer exhauster’s entire body and vane wheel, powder concentrator’s body, pulverized coal’s pipeline, very hot air duct | |
Sintering system | Inlet/outlet bend, wind price plate, cyclone, chute, dust collector’s pipe | |
Afterheat program | Separator’s pipeline and wall | |
Steel | Raw content feeding technique | Hopper, silo |
Batching method | Mixing bunker, mixing barrel, mixing disk, disk pelletizer | |
Sintered material transportation technique | Hopper, silo | |
Dedusting and Ash discharge program | Dedusting pipeline, bend, y-piece | |
Coking method | Coke hopper | |
Medium-speed mill | Cone, separation buffles, outlet pipe, pulverized coal’s pipeline, burner cone | |
Ball mill | Classifier, cyclone separator, bend, powder concentrator’s internal shell | |
Thermal electricity | Coal managing program | Bucket wheel machine, coal hopper, coal feeder, orifice |
Ball mill system | Separator’s pipe, elbow and cone, coal mill’s elbow and straight tube | |
Medium-pace mill | coal mill body, separation buffles, cone, pipeline, elbow | |
Drop mill | Pulverized coal’s pipeline and elbow | |
Dedusting method | Dedusting’s pipeline and elbow | |
Ash discharge method | Admirer duster’s shell, pipeline | |
Port | Transporting content technique | Bucket wheel machine’s disk and hopper, transfer point’s hopper, unloader’s hopper, |
Smelting | Transporting substance method | Measuring hopper, coke hopper, vibrating screen’s chute, head valve, Intermediate bin, tail bin |
Batching method | batch hopper, mixing equipment | |
Burning technique | Ash bucket, pump calcine tube, hopper | |
Dedusting method | Dedusting’s pipeline and elbow | |
Chemical | Transporting material technique | Hopper, silo |
Dedusting technique | Dedusting’s pipeline and elbow | |
Processing equipment | Vibromill liner | |
Coal | Coal dealing with system | Bucket wheel equipment, coal hopper, coal feeder |
Coal washing method | Hydrocyclone | |
Mining | Transporting substance program | Hopper, silo |
CZPT Info Sheet
S.No. | Attributes | Unit | CHEMSHUN 92 I | CHEMSHUN92 II | CHEMSHUN ninety five |
1 | Alumina Articles | % | ninety two | 92 | ninety five |
2 | Density | g/cc | ≥3.60 | ≥3.sixty | >3.65 |
3 | Colour | – | White | White | White |
4 | Water Absorption | % | <0.01 | <0.01 | |
5 | Flexural Toughness | Mpa | 270 | three hundred | 320 |
six | Moh’s Density | Quality | 9 | 9 | 9 |
seven | Rock Properly Hardness | HRA | 80 | 85 | 87 |
8 | Vickers Hardness(HV5) | Kg/mm2 | one thousand | 1150 | 1200 |
nine | Fracture Toughness (Min) | MPa.m1/2 | 3-four | three-four | three-four |
ten | Compressive power | Mpa | 850 | 850 | 870 |
eleven | Thermal Growth Coefficient (25-1000ºC) |
1×10-six/ºC | eight | seven.6 | eight.1 |
12 | Maximum operation temperature | ºC | 1450 | 1450 | 1500 |